Replace Your Washing Machine Hoses | Super Blog

Replace Your Washing Machine Hoses

Time: 30 minutes

While convenient, your washer is one of the greatest flood hazards in your home. If your washer has rubber hoses, you should plan to swap them out every five years (a good trick is to check your hoses every leap year).

At the very least, pause this weekend to take a look at their condition. You should check the hoses for signs of wear, including cracks, kinks, stiffness, or brittleness. Weak hoses should be replaced immediately.

What’s in it for you?

  • Flood prevention
  • Better appliance performance

To Replace Your Washer Hoses:

Unplug the washer and shut off the hot and cold water valves (usually located on a small box on the wall behind the machine).

Lay down a towel and use a wrench to loosen and remove the old supply hoses. Remove the drain hose from the drain and replace it if it has any cracks.

Use a soft bristle brush to clean the washer filter screens. This will remove any sediment build-up that could restrict water flow.

Hand tighten the new hose fittings and give each hose an extra quarter turn with the wrench. Make sure to match the hot with the hot and the cold with the cold when reconnecting the water supply.

Reconnect the drain hose to the drain, open the water supply valves and check for leaks. Your washer is ready to use!

Pro Tip: Use a hose that is long enough to allow you to move the machine (60” usually does the trick). You should also keep the washer at least 4” away from the wall to prevent your supply and drain hoses from kinking.

Sign up for home care updates:

PREV

Ice Maker Maintenance

Time: 15 Minutes There’s something so satisfying about an ice cold drink–don’t let a broken ice…

NEXT

Clean Your Outdoor Grill

Time: 1 hour Summer is peak season for backyard cookouts and you’ve probably put your grill   to good…